Hello all,

Environment:
- SCCM 2007 SP2 R3 on a Win Server 2003 box
- IP ranges used for boundaries
- 7 Standard DP's (5 protected + 2 unprotected, BITS configured
- 5 protected BDP's

Now, I have to add more protected BDP's and each BDP will have only one boundaries assigned (IP range). Same situation as with 5 existing ones.

OK, so I add a new server, add DP role, configure Branch Distribution point as protected and set D drive for packages. (Exactly the same as 5 existing ones.

The problem here is that nothing happens! I can see new server in Site Systems, SCCM client on target device is working just fine, there is nothing under "Protected" column under Boundaries nodeI cannot see new BDP in New Distribution Point wizard (when I want to add a package to new BDP).

The BDP's were installed on Firday last week (I tried four of them, just to be sure) and still no movement.
The PeerDPAgent.log file from one device repeates following lines:

"eerDP Agent is not enabled
Not processing message (<PDPScheduledMaintenance MessageType='PDPStatusTask'/>) as agent is not acting as BDP
Not processing message (<PDPPkgProvisioningStatus PackageType='Pending'/>) as agent is not acting as BDP"

Is there anything else that I can check?
Thanks!

L.

Hi 

I have client installation getting failed on multiple machines , and looking at logs it seems that its getting failed when wua agent is being extracted from file .Please advise on how to work on this.............

These are the log sniipets from ccmsetup.log

PLEASE HELP!!!!!!

I see this question frequently in the forums but usually the answer comes down to how to automatically upgrade clients once installed. I would really like a push client install or OSD client install to install the most current client version from the get-go.

Environment is SCCM 2012 SP1 CU1 server (single primary site with all roles on it), pushing to mostly windows 7 SP1 64-bit workstations, but same result with 32-bit or Windows 8.

When I push the client from the SCCM management console, the workstation installs version 5.0.7804.1000. This makes sense, because that is what the server has in\\SCCM01.ourdomain.com\SMS_STE\Client. But the client is not fully functional at this point. It shows as Active but reports as offline in the console when I, for example, try to send a client notification from the console.

If I reboot the client workstation, a ccm upgrade kicks off. After which the client reports its version as 5.00.7804.1202. At this point I can fully manage the workstation. Trouble is this delay and extra install slow OSD and pushes and are causing some workflow problems. I could see no clues in Windows\ccmsetup\Logs.

Here is my real question: Is there any way to have OSD tasks and client pushes to install the current version of the client instead of the older version that needs to be updated?

Thanks for your reply,

Gary

Gary Knigge, Senior Systems Analyst Division of Technology Services University of Wisconsin-River Falls Wisconsin, USA

I have SCCM 2012 but I can't install Cleints on Server 2003. I have not problem to install client on XP,Win7, server 2008.

Cleint doesn't have firewall

My CCM log is saying

======>Begin Processing request: "2097152351", machine name: "SERVER-1" SMS_CLIENT_CONFIG_MANAGER           11/07/2013 12:09:37 PM5712 (0x1650)

Execute query exec [sp_IsMPAvailable] N'SYD'  SMS_CLIENT_CONFIG_MANAGER       11/07/2013 12:09:37 PM5712 (0x1650)

---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)SMS_CLIENT_CONFIG_MANAGER           11/07/2013 12:09:37 PM5712 (0x1650)

---> Attempting to connect to administrative share '\\SERVER-1\admin$' using account 'nps\sccmadministrator'           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM5712 (0x1650)

---> The 'best-shot' account has now succeeded 36 times and failed 0 times.      SMS_CLIENT_CONFIG_MANAGER           11/07/2013 12:09:37 PM5712 (0x1650)

---> Connected to administrative share on machine SERVER-1 using account 'nps\sccmadministrator'           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM5712 (0x1650)

---> Attempting to make IPC connection to share <\\SERVER-1\IPC$>    SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM      5712 (0x1650)

---> Searching for SMSClientInstall.* under '\\SERVER-1\admin$\'           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM      5712 (0x1650)

---> System OS version string "5.2.3790" converted to 5.20        SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM       5712 (0x1650)

---> Service Pack version from machine "SERVER-1" is 2           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM       5712 (0x1650)

CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e        SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM      5712 (0x1650)

---> Unable to connect to WMI (root\ccm) on remote machine "SERVER-1", error = 0x8004100e.           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM5712 (0x1650)

---> Creating \ VerifyingCopying exsistance of destination directory \\SERVER-1\admin$\ccmsetup.           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM5712 (0x1650)

---> Copying client files to \\SERVER-1\admin$\ccmsetup.         SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM       5712 (0x1650)

---> Copying file "E:\Program Files\Microsoft Configuration Manager\bin\I386\MobileClient.tcf" to "MobileClient.tcf"           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM5712 (0x1650)

---> Copying file "E:\Program Files\Microsoft Configuration Manager\bin\I386\ccmsetup.exe" to "ccmsetup.exe"           SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM5712 (0x1650)

---> Updated service "ccmsetup" on machine "SERVER-1".        SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM       5712 (0x1650)

---> Started service "ccmsetup" on machine "SERVER-1".          SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM       5712 (0x1650)

---> Deleting SMS Client Install Lock File '\\SERVER-1\admin$\SMSClientInstall.SYD'      SMS_CLIENT_CONFIG_MANAGER           11/07/2013 12:09:37 PM5712 (0x1650)

Execute query exec [sp_CP_SetLastErrorCode] 2097152351, 0  SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM       5712 (0x1650)

---> Completed request "2097152351", machine name "SERVER-1".        SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM      5712 (0x1650)

Deleted request "2097152351", machine name "SERVER-1"        SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM       5712 (0x1650)

Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152351, 4      SMS_CLIENT_CONFIG_MANAGER           11/07/2013 12:09:37 PM5712 (0x1650)

Execute query exec [sp_CP_SetLatest] 2097152351, N'07/11/2013 02:09:37', 10  SMS_CLIENT_CONFIG_MANAGER           11/07/2013 12:09:37 PM5712 (0x1650)

<======End request: "2097152351", machine name: "SERVER-1".        SMS_CLIENT_CONFIG_MANAGER        11/07/2013 12:09:37 PM      5712 (0x1650)

Hello guys,

I have an issue with ConfigMgr 2007 not replicating its package from the central server.

On one of the primary site, i did go through on objreplmgr.log and found this line:

Failed to insert Object 8939e1c4-a886-405d-858c-5eb3b5fb77a2 from replication file D:\Program Files (x86)\Microsoft Configuration Manager\inboxes\objmgr.box\INCOMING\Retry\SXC_131253.CID because its reference in table CI_UpdateSources is missing. Error = -2147221499	SMS_OBJECT_REPLICATION_MANAGER	7/8/2013 1:10:04 PM	6748 (0x1A5C)
Processing replication file D:\Program Files (x86)\Microsoft Configuration Manager\inboxes\objmgr.box\INCOMING\Retry\SXC_131176.CID in retry.	SMS_OBJECT_REPLICATION_MANAGER	7/8/2013 1:10:04 PM	6748 (0x1A5C)
SDM Package Name Site_37E0771F-8DF9-4E17-9342-E6040705DE5A/SUM_4cbfea1d-5aa5-4bac-a498-23d619113be5 Version 2 has not arrived yet. Will retry	SMS_OBJECT_REPLICATION_MANAGER	7/8/2013 1:10:04 PM	6748 (0x1A5C)

any suggestion on how to overcome this issue?

My Config: Windows Server 2008 Ent/ MS ConfigMgr 2007 SP1 R2 / MSSQL 2005

Many thanks!

---Packie

Hi guys,

I have this setup on my environment:
1. ConfigMgr 2007 SP2 R2 on Central Site (parent), SQL 2005, Windows 2008 R2
Site code: CS1

2. ConfigMgr 2002 SP2 R2 on Primary site (child), SQL 2005, Windows 2008 R2, reporting to Central Site (CS1).
Site code PS2.

Problem is, package has stopped replicated. And when I view on some package, we havePS2 displayed as a distribution point on CS1, whereby under the PS2 itself the distribution point for the said package is empty!

There are alot of packages reporting the same. Should I do a repair to the site?

Please suggest me. Thanks alot!

---Packie

My SCCM 2007R3 SQL database has grown over 107GB in filesize. I only have about 800 clients so that is way too large.
The data in all SCCM tables is about 3GB and the indexes are about 700MB. When I do a backup of the database the size of the backup is > 100GB.

So why can't I reduce the size of the database to a reasonable amount? The disk is filling up this way and it makes the database/SCCM operations slow.

Any help is greatly appreciated.

Kind regards,

Erwin Vos

Abheek Dutta IT Analyst

I have Sever 2012 and currently managing Windows update manually on Windows 7 and Windows XP clients only as I am not ready yet to use ADR.

I want to achieve the following

• I want all Windows Updates will be available for Servers but it will not install until I logon to those server and manually select what to install and what not to install.

I want to do it for some of critical server, like SharePoint, Exchange, and Dynamic etc. (I have a separate Collection for Critical Servers Only. Could someone tell me, how I can achieve these please?

• For Windows 7 and XP, I want all Critical and Security Updates will install automatically to my XP and Win7 Collections. For rest for updates, I want to create Software Groups manually and approve those install manually.

Hello,

I installed SCCM 2007 sp2 , and site system status all green , but when trying to install client on xp machines that are most of my computer clients , it doesn't install anything , I tried to manually install the ccmsetup on a test machine it creates the ccmsetup folder and gives me the following log at the end of it :

======================================================================================

======================================================================================

Kindly provide me with your assistance regarding this problem considering the I configured boundaries based on active directory sites , and all other settings are ok , but if you someone has any idea of some settings that I can check in order to solve the problem , considering that clients has the firewall off , and default share is enabled as well.

mohammad

Hello,

How to Remove the Central Site Server from SCCM hierarchy and Add New Server as a Central Site Server for Existing Hierarchy.

Scenario.

1) ABC.xyz.com    ( Central Site Server) and Database is there on Seperate Server. 

2)Pri.xyz.com       (Primary Site Server)

    a)sec.xyz.com    (Secondary Site Server)

3)123.xyz.com      (Primary Site Server)

    b)456.xyz.com    (Secondary Site Server)

I want to Remove the Central Site Server (ABC.xyz.com) and I need to Add New Server (ZZZ.xyz.com) to Existing Hierarchy and Need to promote as Central Site Server and all my Existing Primary site Servers should report to New Central Site Server. 

Please let me know is there any option and procedure to achive this. 

Please help me.

MNYash

Gents ,

I have installed SCCM 2012 on my test lab . I'm not able to install client on any machines , here is the log below.

Could some one help me , thanks in advance

Execute query exec [sp_CP_GetNewPushMachines] N'000'~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.875-330><thread=4012 (0xFAC)>
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152004, 1~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.876-330><thread=4012 (0xFAC)>
Execute query exec [sp_CP_GetPushRequestMachine] 2097152004~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.978-330><thread=4012 (0xFAC)>
Successfully retrieved information for machine ATTENDANCE from DB  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.979-330><thread=4012 (0xFAC)>
Execute query exec [sp_CP_GetPushRequestMachineIP] 2097152004~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.979-330><thread=4012 (0xFAC)>
Execute query exec [sp_CP_GetPushRequestMachineResource] 2097152004~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.980-330><thread=4012 (0xFAC)>
Execute query exec [sp_CP_GetPushMachineName] 2097152004~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.980-330><thread=4012 (0xFAC)>
Received request: "2097152004" for machine name: "ATTENDANCE" on queue: "Incoming".  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.981-330><thread=4012 (0xFAC)>
Stored request "2097152004", machine name "ATTENDANCE", in queue "Processing".  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.981-330><thread=4012 (0xFAC)>
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152004, 1~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.982-330><thread=4012 (0xFAC)>
======>Begin Processing request: "2097152004", machine name: "ATTENDANCE"  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.984-330><thread=3180 (0xC6C)>
Execute query exec [sp_IsMPAvailable] N'000'~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.985-330><thread=3180 (0xC6C)>
---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.985-330><thread=3180 (0xC6C)>
---> Attempting to connect to administrative share '\\ATTENDANCE\admin$' using account 'GREENTECHCOE\raju'~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:10.986-330><thread=3180 (0xC6C)>
---> The 'best-shot' account has now succeeded 3 times and failed 0 times.  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.038-330><thread=3180 (0xC6C)>
---> Connected to administrative share on machine ATTENDANCE using account 'GREENTECHCOE\raju'~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.038-330><thread=3180 (0xC6C)>
---> Attempting to make IPC connection to share <\\ATTENDANCE\IPC$> ~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.039-330><thread=3180 (0xC6C)>
---> Searching for SMSClientInstall.* under '\\ATTENDANCE\admin$\'~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.040-330><thread=3180 (0xC6C)>
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x800706ba~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.330-330><thread=3180 (0xC6C)>
---> Unable to connect to WMI on remote machine "ATTENDANCE", error = 0x800706ba.  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.331-330><thread=3180 (0xC6C)>
---> Deleting SMS Client Install Lock File '\\ATTENDANCE\admin$\SMSClientInstall.000'~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.331-330><thread=3180 (0xC6C)>
Execute query exec [sp_CP_SetLastErrorCode] 2097152004, -2147023174~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.336-330><thread=3180 (0xC6C)>
Stored request "2097152004", machine name "ATTENDANCE", in queue "Retry".  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.338-330><thread=3180 (0xC6C)>
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152004, 2~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.338-330><thread=3180 (0xC6C)>
Execute query exec [sp_CP_SetLatest] 2097152004, N'07/23/2013 10:20:11', 28~  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.339-330><thread=3180 (0xC6C)>
<======End request: "2097152004", machine name: "ATTENDANCE".  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:11.340-330><thread=3180 (0xC6C)>
Submitted request successfully  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:12.987-330><thread=4012 (0xFAC)>
Getting a new request from queue "Incoming" after 100 millisecond delay.  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:12.987-330><thread=4012 (0xFAC)>
Waiting for change in directory "C:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box" for queue "Incoming", (30 minute backup timeout).  $$<SMS_CLIENT_CONFIG_MANAGER><07-23-2013 15:50:12.988-330><thread=4012 (0xFAC)>

Hello,

I have tried running the Client Push wizard for a single computer or a pilot collection of 8 computers, the result is always

the same - no SCCM client is installed on any computer.

The computers are running 32-bit Windows XP SP2.

The Windows firewall is disabled.

The client push installation account is setup and have domain admin and local admin privileges. Client Push automatic method

is not enabled.

The domain is AD WIndows 2000.

The SCCM server is running Windows 2003 R2 SP2 64bit Standard.

The AD schema has been extended.

MP, and SLP are installed and published. (MP is published in DNS as well.)

FSP is installed.

MP, SLP and FSP are running on the same server.

SQL 2005 server is running locally.

System management container is created and all rights and permissions delegated.

With the Push installation account I can access C$ share on the client computer from the SCCM server.

RPC, Remote registry, WMI services are running on the client machines.

All prerequisites are installed from the client folder on SCCM server- latest BITS 2.5, Windows installer 3.1 and MSXML6.

All computers are in the same IP subnet which is listed in the boundaries.

Yet, the client is not being installed.

No CCMSetup folder is created on the client machines in Windows\System32 folder, so it is really difficult to troubleshoot

what the is the issue. I do not see anything helpful in the ccm.log on the server.

I have tried running the CCMSetup.exe manually on one of the workstations and that was successful and reported back to the

SCCM server / console.

What else I should check / try? I really want to push agents via the wizard.

Thank you,

Peter

Greetings,

The initial scenario is the following:

• SCCM 2007 SP2 R3.
• 1 Primary Site. 1 server (Win2008 R2 SP1)
• 1 Secondary Site. 1 sever (Win2003 R2 SP2)

Five days ago I have removed the secondary site using Add/Remove Programs in the Secondary Site server. I have removed using this article: http://technet.microsoft.com/en-us/library/bb632423.aspx

The objects in AD (System Management) was removed successfully.

The secondary site was removed from the SCCM console.

The problem is in sender.log I have the following:

Cannot connect to server Secondary_Server at remote site Secondary_Site_Code, won't try send requests going to site Secondary_Site_Code for an hour or until there are no active send requests.    SMS_LAN_SENDER    24/08/2012 10:08:08    5036 (0x13AC)
Could not establish connection.    SMS_LAN_SENDER    24/08/2012 10:08:08    5036 (0x13AC)
Attempt to connect failed.    SMS_LAN_SENDER    24/08/2012 10:08:08    5036 (0x13AC)
Restart time = 24/08/2012 10:13:08 SA Pacific Standard Time    SMS_LAN_SENDER    24/08/2012 10:08:08    5036 (0x13AC)
There is no existing connection, Win32 error = 67    SMS_LAN_SENDER    24/08/2012 10:08:08    1168 (0x0490)
Error during connection to \\Secondary_Server\SMS_SITE (67).    SMS_LAN_SENDER    24/08/2012 10:08:08    1168 (0x0490)
Error is considered fatal.    SMS_LAN_SENDER    24/08/2012 10:08:08    1168 (0x0490)

I need the procedure to completely and successfully remove the secondary site remainders.

Thanks in advance!

I recently upgrade my sccm 2007 sp1 to sp2 after that I can’t do push install on clients. The I look on the Management Point Installation Logs MPSetup.Log and MpMsi.log and I found that the MP is not installed it fail with <06-16-2011 14:37:40> Fatal MSI Error - mp.msi could not be installed.

This is the log errors from mpsetup.log

[14:37:29] ERROR: Method 'DeleteExtensionFileRecord' failed with error code 80020009

[14:37:29] ERROR: Automation Exception invoking method "DeleteExtensionFileRecord"

[14:37:29] ERROR: Automation Exception Source is "<null>"

[14:37:29] ERROR: Automation Exception Description is "<null>"

[14:37:29] ERROR: Automation Exception wCode is 0

[14:37:29] ERROR: Automation Exception sCode is 0x800CC801

[14:37:29] IGNORE: Failed to delete extension 'D:\Program Files\SMS_CCM\getpolicy.dll'. Error Code = 0x80020009 (The extension might not registered)

[14:37:29] ERROR: Method 'DeleteExtensionFileRecord' failed with error code 80020009

[14:37:29] ERROR: Automation Exception invoking method "DeleteExtensionFileRecord"

[14:37:29] ERROR: Automation Exception Source is "<null>"

[14:37:29] ERROR: Automation Exception Description is "<null>"

[14:37:29] ERROR: Automation Exception wCode is 0

[14:37:29] ERROR: Automation Exception sCode is 0x800CC801

[14:37:29] IGNORE: Failed to delete extension 'D:\Program Files\SMS_CCM\GetAuth.dll'. Error Code = 0x80020009 (The extension might not registered)

[14:37:29] ERROR: Method 'DeleteExtensionFileRecord' failed with error code 80020009

[14:37:29] ERROR: Automation Exception invoking method "DeleteExtensionFileRecord"

[14:37:29] ERROR: Automation Exception Source is "<null>"

[14:37:29] ERROR: Automation Exception Description is "<null>"

[14:37:29] ERROR: Automation Exception wCode is 0

[14:37:29] ERROR: Automation Exception sCode is 0x800CC801

[14:37:29] IGNORE: Failed to delete extension 'D:\Program Files\SMS_CCM\getsdmpackage.dll'. Error Code = 0x80020009 (The extension might not registered)

[14:37:29] The virtual directory 'SMS_MP' does not exist

[14:37:29] Successfully removed IIS Virtual Directory 'SMS_MP'

[14:37:29] Removing IIS Virtual Directory 'CCM_System_WindowsAuth'

[14:37:29] ERROR: Method 'DeleteExtensionFileRecord' failed with error code 80020009

[14:37:29] ERROR: Automation Exception invoking method "DeleteExtensionFileRecord"

[14:37:29] ERROR: Automation Exception Source is "<null>"

[14:37:29] ERROR: Automation Exception Description is "<null>"

[14:37:29] ERROR: Automation Exception wCode is 0

[14:37:29] ERROR: Automation Exception sCode is 0x800CC801

[14:37:29] IGNORE: Failed to delete extension 'D:\Program Files\SMS_CCM\ccmisapi.dll'. Error Code = 0x80020009 (The extension might not registered)

[14:37:29] The virtual directory 'CCM_System_WindowsAuth' does not exist

[14:37:29] Successfully removed IIS Virtual Directory 'CCM_System_WindowsAuth'

[14:37:29] Removing IIS Virtual Directory 'CCM_System'

[14:37:29] ERROR: Method 'DeleteExtensionFileRecord' failed with error code 80020009

[14:37:29] ERROR: Automation Exception invoking method "DeleteExtensionFileRecord"

[14:37:29] ERROR: Automation Exception Source is "<null>"

[14:37:29] ERROR: Automation Exception Description is "<null>"

[14:37:29] ERROR: Automation Exception wCode is 0

[14:37:29] ERROR: Automation Exception sCode is 0x800CC801

[14:37:29] IGNORE: Failed to delete extension 'D:\Program Files\SMS_CCM\ccmisapi.dll'. Error Code = 0x80020009 (The extension might not registered)

MSI (s) (18!F0) [14:37:37:335]: Product: SMS Management Point -- Error 25006. Setup was unable to create the Internet virtual directory CCM_Incoming

The error code is 80070005

MSI (s) (18:60) [14:37:40:691]: Windows Installer installed the product. Product Name: SMS Management Point. Product Version: 4.00.6487.2000. Product Language: 1033. Installation success or error status: 1603.

The account that i am trying to install SCCM 2007 has full rights on SQL Server
1) SCCM 2007 machine has local administrator rights on SQL Server
2) Also has sysadmin rights on SQL Server.

But still i am getting this error " SQL Server sysadmin rights"

We are in the process of moving to a SCCM 2007 for software updates. I am reviewing the otehr articles in the forum but wanted to post my own questions/concerns. Thanks in advance for any and all help.

Current environment:

SCCM installed, topology setup but no updates synched and the only clients are on workstations and a handful of test servers.

A wsus box in each AD site (2008, built in WSUS)

SCCM VM lives in a data center with MPLS links to each AD site. Has seperate SQL box.

All the current WSUS servers are shown in the SITE SEREVRS of the SCCM console except the 'top' box they all pull updates from.

I'm working through a book and the SuperFlow for updates. We want to be able to push updates to servers and get reports about success failure across the enviornment.

the client installs look pretty quick and didn't require a reboot on the servers. Are there any gotchas on this? Has anyone had major issues with client pushes?

I'm confused about how the WSUS ties into the SCCM and what happens with the updates it already has on it.

I'd like to know more about the issues of moving to 2012 SCCM...? Anyone done it and have a report?

How difficult is it to make update packages for servers? Workstations? How about non MS software?

Is there a documented way to go form WSUS to SCCM for updates so I don;t reinvent the wheel?

Thanks again!